Price : $7.99
Brand : Matek Systems

Matek Systems PDB-XPW w/ Current Sensor 140A & Dual BEC pdb quadcopter distribution board drone flight controller

Features:
2 oz copper, 4 layers & 2mm PCB.
Built-in current sensor 140A
Built-in XT60PW socket
Total 4 pairs ESC solder tabs are fit for X-Type frames.
5V & 12V output LED indicators & short circuit tolerant.

Specifications:
General:
Input voltage range (3S-5S LiPo operation): 9 – 21V DC
PDB: 4 x 35A
Regulated 5V and 12V outputs
Current module 150A
LED power indicators ( 5V & 12V outputs )

Current Module
150A
3.3V ADC

BEC 5V output:
Designed for RC Receivers, Flight controllers, OSD, and Servos.
DC/DC synchronous buck regulator.
Voltage: 5.0 +/- 0.1VDC
Continuous current: 2 Amps (Max.2.5A 10s/minute)
Output Ripple: 40mV (VIn=16V, VOut=5V@2A load)
Short-circuit tolerant (5 seconds/minute)

BEC 12V output:
Designed for Video TX or FPV camera with linear regulator.
The battery should be 4~5S LiPo (13~21V DC)
Voltage: 12.0 +/- 0.3VDC
Continuous current: 500mA (Max.0.8A 5s/minute)
Short-circuit tolerant (2 seconds/minute)

BEC 12V @ 3S LiPo
Output voltage= 3S LiPo voltage -1V

Physical:
Mounting: 30.5 x 30.5mm, F3mm
Dimensions: 36 x 50 x 4 mm (w/o XT60PW), 36 x 58 X10.5mm (w/ XT60PW)

Package includes:
1 x XPW PDB with XT60PW socket
1 x Mounting Set

 

Comments are closed.